多路Marx并联高压脉冲电源研究

脉冲功率技术在工业和生物医学领域有着广泛的应用,很多应用场合要求输出数百安培的高压脉冲。固态Marx发生器虽已研究多年,但是被广泛采用直插封装的IGBT和MOSFET功率半导体开关管的额定电流通常都低于100 A,无法满足低阻抗负载的应用需求。为提高输出脉冲电流幅值,提出两种多路Marx发生器并联的脉冲电源的拓扑结构,第一种方案采用多路Marx发生器直接并联,第二种是共用一组充电开关管的多路Marx发生器并联。由FPGA提供充放电控制信号,采用串芯磁环隔离驱动方案实现带负压偏置的同步驱动,主电路选用开通速度快、通流能力强的IGBT为主开关的半桥式固态方波Marx电路。实验结果表明,6路16级Marx直接并联的脉冲发生器能输出重频100 Hz高压方波脉冲幅值可达10 kV,在30Ω负载侧输出峰值电流可达300 A,上升时间230 ns。共用充电开关管的6路4级Marx并联发生器在5Ω电阻负载上的输出电流峰值可达300 A,最大输出电流可达460 A,上升时间272 ns。表明多路Marx发生器并联可以有效地减小系统内阻,提高系统带载能力;改进后的并联方案实现大电流脉冲输出的同时,所采用的开关管数量减小近一半,提高了系统的抗干扰能力的同时,降低了脉冲电源的成本;且增加级间并联导线可进一步改善均流效果。     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

A micrometer head integrated microfluidic device for facile droplet size control and automatic measurement of a droplet size

A novel microfluidic droplet generator is proposed, which can control the droplet size through turning an integrated micrometer head with ease, and the size of the produced micro-droplet can be automatically and real-time monitored by an open-sourced software and off-the-shelf hardware.     

内函数逼近定理及上溢原理的推广及应用

在κ-饱和的非标准模型中,首先推广了内函数逼近定理,并用这一推广定理证明了著名的A sco li定理;其次将上(下)溢原理推广到一般的定向集上,并证明了拓扑空间中单子的一些性质,给出了无穷小延伸定理的一个简单证明.     

基于白化值的区间DEA建模

传统数据包络分析要求输入输出数据为精确数,然而在某些实际应用中,区间形式的数据相较于精确数更容易获得.将区间数转化为白化值,并基于传统C~2R模型提出了基于白化值的区间C~2R模型.考虑到决策单元的有效性不易通过基于白化值的区间C~2R模型来判断,因此将非阿基米德无穷小概念引入到上述模型,构建了具有非阿基米德无穷小的区间C~2R模型.此外,还给出了用于判断决策单元有效性的区间目标规划方法:分别通过G_(IC~2R)模型和WG_(IC~2R)模型判断决策单元是否为区间DEA有效与区间弱DEA有效.     

Correlation of swirl number for a radial-type swirl generator

An experimental investigation was undertaken to derive a new correlation for the swirl number of a radial-type swirl generator under various Reynolds numbers and various vane angle conditions. A radial-type swirl generator with 16 rotary guide vanes was used to generate an annular swirling jet flow. The Reynolds numbers ranged from 60 to 6000, and the vane angles from 0° to 56°. Quantitative measurements for the velocities were made by using an optical method of laser-Doppler anemometry (LDA). Three-component velocity profiles of axial, radial, and azimuthal components at the swirling jet exit were measured for various flow conditions. A flow visualization method using smoke-wire and still photography was also applied to observe the flow patterns of the recirculation region behind the circular bluff body. Under low Reynolds number conditions, the swirl strength was found to be strongly dependent on the Reynolds number as well as on the guide vane angle. Based on the experimental results, a modified swirl number S is derived to characterize the swirling flow, which is useful for the design of a swirl generator.     

Bifurcation and chaos of a simple walking model driven by a rhythmic signal

The walk of animals is achieved by the interaction between the dynamics of their mechanical system and the central pattern generator (CPG). In this paper, we analyze dynamic properties of a simple walking model of a biped robot driven by a rhythmic signal from an oscillator. In particular, we examine the long-term global behavior and the bifurcation of the motion that leads to chaotic motion, depending on the model parameter values. The simple model consists of a hip and two legs connected at the hip through a rotational joint. The joint is driven by a rhythmic signal from an oscillator, which is an open loop. In order to analyze the bifurcation, we first obtained approximate solutions of the walking motion and then constructed discrete dynamics using the Poincaré map. As a result, we found that consecutive period-doubling bifurcations occur as the model parameter values change, and that the walking motion leads to chaotic motion over the critical value of the model parameters. Moreover, we approximately obtained the period-doubling solutions and the critical value by employing a Newton-Raphson method. Our analytical results were verified by the numerical simulations.     

共线式热电发电机在侧面散热情况下的性能

热电材料是一种环境友好型功能材料,其可以实现热能与电能的相互转化,在热电发电、热电制冷中具有许多应用.传统的热电发电机为$\pi$型结构,要求热电腿的长度相等,在某些情况该结构不利于热电发电机的优化设计.热电发电机在高温工况下会引起强烈的热应力甚至应力集中,从而缩短了其工作寿命.另外,热电发电机的工作温度于环境温度,这样必然会有一部分热量散失到环境中,从而影响热电发电机的性能.针对该现象,本文建立了考虑散热的新型共线式热电发电机模型,该模型的热电腿可以独立进行优化,基于有限元方法,对考虑侧面散热的共线式热电发电机进行了仿真模拟,分析了其在狄利克雷边界条件下的热电性能和力学性能,得到了热电发电机的温度场、电势场、应力场,探究了不同强度的对流散热系数对热电发电机热电性能和力学性能的影响.结果表明,对流散热会降低热电发电机的能量转化效率,当对流换热系数达到~100W/(m$^{2}\cdot$\textcelsius) 时,效率为~0.0479,该值比绝热状态的转化效率0.066 7 低28%.对流散热使热电发电机侧面热损失增加,降低了热应力.在实际应用中,应合理优化设计隔热系统,提高能量的转化效率.